Legrand’s access control solutions

Legrand’s standalone and centralised access control systems have been designed for the efficient management of flows of people and for optimum security of access to several areas in public and private establishments.

 

“These access control systems, which are easy to install and use, offer simple, one-off application solutions, as well as the management of complex scenarios,” says Luk Ivens, general manager, Legrand SA. “Fingerprint readers, badge readers and coded keypads are supported by user-friendly supervision software and a range of accessories that enhance performance of the system.

 

“Sometimes a classic key management system is inadequate for managing a number of accesses, copying a lost key or providing temporary access to one or more people. This is when electronic access management should be implemented. An important feature is these flexible systems can be easily adapted without having to change the readers.”

 

“Legrand offers a technical advisory and support service to ensure customised solutions for every access control installation. These services include on site software training, pre-encoding of readers and badges, as well as customisation of badges, which encompasses detailing personal details and corporate identity.”

 

The first step

 

Standalone access control systems, which are recommended for small areas, like meeting rooms and individual offices, are also suitable for larger sized buildings where no management of events or supervision is required. For example, access to hotel rooms.

 

Advantages of standalone systems include easy installation, optimised wiring and simple programming.

 

Standalone systems encompass one isolated internal or external door, or up to 256 doors with an encoder, which is linked to badge management software. This system has a flow management capacity of up to 500 users and 32 groups of users, depending on the circumstances.

 

The software can also be used to manage lost or stolen badges, as well as for remote modification of the access area. This system also controls lifts, automatic control devices and gates. Because is there is no physical connection between the reader and the computer, minimal wiring is required.

 

A reader is defined as being standalone when it manages the ID information – a stored code, badge or fingerprint – that is incorporated inside, or configured on a badge. The ID memory is integrated in the reader and the information is read directly on this device, which controls the closing system (door release, electromagnetic lock or bolt).

 

The standalone Arteor coded keypad enables temporary codes to be easily created and allocated for external companies or temporary staff, without having to disclose the codes of permanent staff. This is an important security feature.

 

The second step

 

Centralised access control systems, which are designed for users who need to manage office buildings, healthcare, educational or commercial establishments from one or more control stations, meet the requirements for internal and external management of flows of people.

 

An advantage of this system is the ability to supervise events display of information on CAD drawings of the installation and obtain an overview of all flows in real time. Various scenarios are available – for example, creation of automatic control devices and access to interoperability with other systems, including video surveillance.

 

Centralised systems, with one isolated internal or external door, or up to 256 doors with an encoder, are designed for the management of visitors, groups and 10 000 of the most recent events events, as well as the loss of badges. This system also controls access and alarm activation times, automatic control devices and periods and dates of validity of access. This system can control up to 10 000 users and 64 groups.

 

Centralised access control consists of a door controller, used in conjunction with several peripherals. Code, badge or fingerprint ID’s are transmitted to the controller, which manages access though the door. Within the installation, the door controllers use the IP network infrastructure – here, Legrand’s LCS² cabling system is recommended. A door controller is configured with the same overall information as the standalone system. It also has its own on-board interface, where all the component parts of the device (power supply, reader, closing system) are wired on the controller.

 

When used on its own, the software can be used to programme scenarios for the two doors connected to it, thus providing simplified, standalone management if required. Centralised management software links and manages door controllers distributed throughout the installation.

 

A typical application of this system is visitor access to a controlled car park via a video entry system. To ensure traffic flows freely through the car park entrance at peak times, a period of free access can be programmed, while maintaining control at the exit. Creating groups of users enables access rights to be granted and if necessary modified, for a defined set of people in a company or in a particular department. Effective management of access rights prevent external workers accessing the building once they have completed their work.

 

Arteor white or black internal and external coded keypads and badge readers, as well as biometric fingerprint readers, which are designed for flush or surface box mounting, can be used in standalone or centralised mode. Internal and external kits consist of Arteor coded keypads and pushbuttons supplied complete, as well as a protected power supply and back-up battery. All readers have indicators and a buzzer to indicate the door the status.

 

Energy saver units are designed for switching on a circuit, when required, for example in a meeting room, office or hotel room. There is a luminous strip on the front for easy visibility when entering a dark room.

 

Installation accessories include an electromagnetic lock, a motorised bolt, a two stage door release and a shunt trip door release.

 

This system has a 12 V power supply, equipped with electronic protection again over-loads and short circuits, as well as integral fuse protection on input. For enhanced protection there is a filtered rectified power supply comprising a safety transformer with interference filtering and a filter capacitor. Integrated positive temperature co-efficient (PTC) means that in the event of an automatic cut-off due to an overload or short circuit, the power supply is automatically switched off. It is allowed to cool down before switching on again.

 

For further information Internal Sales, Legrand SA

PO Box 1917 Kelvin 2054

Telephone (011) 444 7971

Telefax     (011) 444 7980

Email        legrand.south-africa@legrand.co.za

Web          www.legrand.co.za

 

 

, , , , , , , , , , ,